PRODUCTS : LOUDSPEAKERS : Mira Monitor
![](miramonitor.jpg)
Mira Monitor
The Mira Monitor is our answer to an affordable, stand mounted, two-way loudspeaker. The Mira Monitor was designed to deliver unparalleled transparency, neutrality, and dynamic contrasts, while fully capitalizing on the inherent simplicity and purity of the two-way format. Owing to its cabinet’s dual layer, constrained mode damped construction and 3” thick baffle, the Mira Monitor’s surprising musical presentation will astound even the most jaded audiophile. The Mira Monitor conveys sense of “weight” and correct image proportion, as well as dynamic contrasts that are remarkable for a speaker of this stature. The Mira Monitor comes standard with a clearcoated, high gloss piano black finish.
Base and midrange for the Mira Monitor are provided by a nomex cone, 6 1/2” midbass driver, while high frequencies are handled by a Scanspeak soft dome tweeter. Because of its robust construction, this tweeter can be crossed over at a very low frequency which allows for greatly improved driver dispersion patterns in the crossover region and improved in-room tonal characteristics and image focus. The custom built stand for the Mira Monitor is constructed form solid steel and fully wielded at all joints, and is finished in a low luster black. For the discriminating listener with a smaller room, the Mira Monitor is the perfect solution.
Woofer |
6.5” Nomex Cone |
Tweeter |
1” Fabric Dome |
Internal Wiring |
Transparent Audio |
|
|
Height |
43.19” |
Width |
11.95” |
Depth |
10.60” |
Weight |
115 lbs. each |
Frequency Response |
45Hz - 20KHz, -3db |
Nominal Impedance |
6 ohms |
Sensitivity |
85 dB SPL/2.83 v |
Min. Amplifier Power |
30 watts |