PRODUCTS : ELECTRONICS : DUO SERIES
| Available Standard Versions | |
|---|---|
| Duo 73 |
Minimum configuration, consists of two isolation elements |
| Duo 73 Add-on |
Additional isolation element for combinations of three and more isolators. |
| Performance Specifications |
|
| Isolation technology: | Halcyonics active vibration isolation technology based on piezoelectric type acceleration pickup, fast signal processing and electro-dynamic force transducers. |
| Force directions: | Active compensation in all six degrees of freedom |
| Isolation performance: | > 5 Hz = 25 dB (94.4%); > 10 Hz = 35 dB (98.2%) |
| Active bandwidth: | 1.0 – 200 Hz* |
| Settling time: | 300 ms |
| Max. correction forces: | Vertical ± 16 N; horizontal ± 8 N (for Duo 73 – 2 isolator configuration) |
| Load capacity: | 0 – 400 kg (0 – 880 lbs) per element |
| Other Specifications |
|
| Dimensions: |
See figure 2 |
| Weight: | 26 kg (57.3 lbs) per isolation element |
| Maximum compensation level: | 350 µm/s at 9Hz and 300 kg (661 lbs) ** |
| Interface: | BNC analog diagnostic output – 50 Ohms |
| Environmental and Operational Requirements | |
| Electrical voltage: | 100 – 250 V / 47 – 63 Hz |
| Power consumption: | 10 – max. 50 W per element |
| Operating temperature: | 10 – 40°C (50 – 104 F) |
| Relative humidity: |
0 – 60% |
| Operating altitude: | < 2500 m (8100 ft) |
| Certification | |
| Electrical Safety: | CE certificated according to directive 89/336/EC |
| EMC: | CE certificated according to directive 73/23/EEC |
| * Floating table top is supported by steel springs; low-pass characteristics of spring-mass combination dominates the dynamic behaviour above 200 Hz. ** The maximum compensation level depends on several conditions, such as payload, frequency, load distribution and height of the payload as well as the distance between the isolation elements. For that reason this value should be considered as an estimation. |
|
